from €287,950
Hull length9.98 mFilter by hull length
Beam3.54 m
Weight4,900 kgFilter by weight
Max. power700 hp
CE categoryB
About this boat
The Avantgarde 35 is not a RIB but a walk-around cabin cruiser from Salpa’s Barche range. The model stands out thanks to its distinctive Axe-Bow bow and wide gangways, which make the entire deck usable. The hull, transom and bottom are made of fibreglass.
Specifications
Dimensions and weight
- Hull length
- 9.98 m
- Length overall
- 11.20 m
- Beam
- 3.54 m
- Weight
- 4,900 kg
- Max. persons
- 12
Engine and power
- Max. power
- 700 hp
- Number of engines
- 2
- Max. power per engine
- 350 hp
- Fuel tank
- 672 l
Hull and construction
- CE category
- B
- Hull material
- GRP
Full description
Show full description
What makes this model special is its hull form, which was developed using flow simulations and towing tank tests. This results in lower drag, both at low speeds of up to eight knots and at cruising speed.
The overall length is 11.20 metres and the CE hull length is 9.98 metres, with a beam of 3.54 metres. The dry weight is 4,900 kilograms.
Salpa offers two propulsion options: twin outboard engines of 250 hp each, or a single sterndrive of 370 hp. The maximum power that can be installed is 2 x 350 hp. Fuel is carried in two tanks, each with a capacity of 336 litres, whilst the water tank holds 200 litres.
Below deck there are four berths and a bathroom, making the model suitable for day trips and overnight stays on board. A remarkably spacious and easily accessible anchor locker completes the practical layout.
