SSX 30

Nine feet wide, this space extends right up to the bow, where there are hinged storage compartments beneath the panelling.

The hull length is 9.19 metres and the beam is 2.74 metres. The dry weight is approximately 2,812 kilograms. The draught is 0.58 m (propulsion system raised). The air draft is 2.01 metres (arch lowered), and 2.69 metres with the arch raised. All measurements have been converted to the metric system based on the yard’s specifications.

The yard states a maximum power output of 437 hp. The hull utilises the Extended V-Plane design, in which the running surface extends beyond the transom. According to the yard, this provides stability at low speeds, a quick planing response, a smooth ride in rough water, sharp turning manoeuvres and a dry ride thanks to the high freeboard. The draught with the propulsion system lowered is 0.99 metres. The hull is constructed from fibreglass, as is customary for this builder.

The fuel tank holds 378.54 litres. There is 56.78 litres available for drinking water. The deadrise at the stern is 22 degrees. The cladding on all 2026 models is made from SiO silicone material, which, according to the yard, is virtually maintenance-free and highly resistant to scratches and abrasion. Each hull comes with a lifetime limited warranty, whilst components are covered by a five-year limited warranty.