Anytec

Swedish aluminium sports boats built for very high speeds.

Anytec Anytec s welded aluminium boats designed for high speeds on open water. The brand was founded around the turn of the century in Oregrund on Sweden’s east coast and is operated by Sweden AB, which has its offices on Storgatan in Umeå. The hulls are constructed in a mould from individual sheets of a seawater-resistant aluminium alloy and are then welded entirely by hand, without the use of robots or other automation. The yard aims for a speed of sixty knots and uses deep V-hulls; on the A30, the V-angle is twenty degrees at the stern and forty-seven degrees at the bow.

The model range is divided into four series. The 622-750 series comprises the 622 SP, the 622 SPD and the 750 SPD; the 8 series comprises the 860 SPD, the 860-T and the saloon version 868 CAB. The A-series ranges from the A27 and A27C, via the A28-T, to the A30 and the cabin boat A33C. The Xtreme range comprises the 800R, the A30 X-TND and the 1221 SPD. The range thus spans from approximately 6.8 to 11.7 metres, with outboard power ratings of up to 1,000 hp. The boats are designed for high-speed cruising, sport fishing and commercial use.

Facts & figures

• Operated by Anytec Sweden AB on Storgatan in Umeå
• The brand originally comes from Oregrund on the east coast of Sweden
• Hulls are welded entirely by hand, without the use of robots
• Builds boats ranging from approximately 6.8 to 11.7 metres
• Shares its address and international dealer network with Ockelbo Boats